Product Features
| Brand | Rainwater |
| Model | RNW – 1700 |
| +pH Level | 8+ pH |
| Purification Capacity | 200 L |
| Cold Water Tank | 4.0 LT |
| Hot Water Tank | 2.0 LT |
| Water Storage Tank | 6.0 LT |
| Filtration Type | Reverse Osmosis |
| Number of Filters | 4 Filter System |
| Product Dimensions | W=26cm x H=118cm x D=34cm |
| Water Tank Feature | 304 Stainless Steel |
| Color | White |
| Area of Use | Living Spaces |
| Power Consumption | Heater: 600W, Cooler: 120W |
| Voltage | AC 220-240V / 60HZ |
| Service Period | 2+8 Years |
| Technology | USA Technology |
| Distributor | Rainwater Inc. |
Product Description
RNW – 1700
Water Purifier Dispenser
UV Hygiene Technology
It is a technology that prevents bacteria from entering the inside of the water purifier and creates a two-way barrier that flows out of the tap.
Removable water drip grid
Hygiene protector support
Eliminates the need to clean the replaceable tap during service.
Sedimentation filter
It removes deposits such as rust, carbon dust, silt, clay and sand grains.
Technology
Technologies
Multi-Layered
Hyper Filtration
Technology
Step 1
Sediment Filter for Particle Removal
The mains water first comes to the pre-filter with a pore size of 5 microns. The task of this high-tech filter is to remove coarse impurities in the water, i.e. sediments such as dust, sand, algae, insects, etc. down to 5 microns. Over 5 microns in size, some microorganisms, dissolved chemicals and minerals can still be found in the water, which is thoroughly clarified by the sediment filter, where suspended particles and bacteria are retained in the water.
Step 2
Pre-Carbon Filter for Removal of Chlorine and Organic Matter
The water comes to the block carbon filter. The task of the block carbon filter is to remove organic substances that cause bad taste, odour and colour, as well as chlorine in the water and, if any, gas odours. It makes the water more delicious, clear and odourless. It provides advanced filtration by filtering the water filtered by the sediment filter up to 5 microns with a sensitivity of 1 micron.
Step 3
Hyper Filtration for Advanced Treatment
The semi-cleaned water comes into the hyper filtration cartridge, which is the heart of the system. Hyper filtration has a semi-permeable membrane structure and works with a pressure of at least 2.5 atmospheres. Its pores are between 8-10 angstrom. On hyper filtration; Thanks to the semi-permeable membrane with pores as one millionth of a millimetre, heavy metals such as lead, mercury, nitrate, arsenic, copper, bacteria, lime and other chemical pollutants dissolved in water cannot pass.
Hyper filtration allows the passage of water molecules, while providing flawless filtration of dissolved chemicals, microorganisms and harmful minerals. Only water molecules and anions and cations beneficial for human health pass through this filter. The water coming out of hyper filtration is real healthy drinking water. The daily water yield of hyper filtration is approximately 350 litres. The healthy drinking water obtained from the membrane comes into a 12 litre stainless steel tank and is stored there.
Step 4
Alkaline Filter / To regulate the taste and odour of water
The water from the tank to the tap finally comes to the carbon filter to gain flavour. The task of this filter is to prevent the formation of microorganisms by removing odour-causing substances. Water in this filter; the taste is improved. At the last stage, the water comes to the tap. Thus, healthy and fresh Rainwater water is ready to drink safely.
